Standard Full Function 2Mp IP Camera

Send Inquiry
Standard Full Function 2Mp IP Camera
Details
Model No.: DV-IP3384
FEATURE
1.True 2 MP — 1920 × 1080 at 25 or 30 fps
2.1/2.8″ sensor with 100 dB multi-exposure WDR
3.3.7 mm pinhole lens, 74° H / 46° V field of view
4.H.265, H.264 and MJPEG across three concurrent streams
5.BNC (CVBS) output for a local analogue monitor
6.Two-way 3.5 mm audio, 1 alarm in / 1 alarm out, RS-485 for PTZ
7.microSD up to 128 GB — about 18 h at 16 Mbps
8.50 × 39 × 28 mm cube on a pigtail harness, 0.17 kg
Category
2Mp Full HD IP Camera
Share to
Description

Product Description

The 1.3 MP USB Camera is a 34.5 mm boxed module for inspection benches, meeting rooms and kiosk fronts that need a fixed, driver-free camera. A 1/3" sensor delivers 1280 × 960 at 30 fps in MJPG, or 9 fps uncompressed, so a moving part stays sharp without a capture card. The M12 mount takes 2.1 to 6 mm lenses, and the 2 200 mm cable reaches a controller inside the cabinet. VID 0C45 / PID 6320 is published, so IT can whitelist the unit in a locked Windows image. UVC runs on Windows, Linux, Android and macOS with no driver. Lens, cable, housing and firmware are customizable at volume.

DV-IP3384

1

 

Applications

 

Retrofit & legacy upgrades:

An IP channel added to an analogue site without re-cabling the monitor run.

 
 

Retail & convenience:

Counter overview with a local BNC monitor at the till.

 
 

Banking & teller:

Teller position with two-way audio and a duress contact on the alarm input.

 
 

Embedded & OEM:

Inside access-control pedestals, kiosks and machine cabinets.

 

 

Product specification

 

2.1 Imaging

Image sensor

1/2.8″ CMOS

Effective pixels

1920 × 1080 (2.07 MP)

Pixel size

2.9 µm - to be confirmed

Scanning

Progressive

Electronic shutter

1/5 s – 1/20,000 s

Lens

3.7 mm pinhole; aperture stated as F1.2 - to be confirmed

Field of view

D 82° / H 74° / V 46° (calculated for 3.7 mm on 5.568 × 3.132 mm)

Day / night

IR-cut filter switching (ICR); no built-in IR illuminator

Minimum illumination

0.02 lux (colour, F1.2, 1/30 s, AGC max) - to be confirmed

S/N ratio

≥ 30 dB (video)

Wide dynamic range

100 dB, multi-exposure WDR - frame count to be confirmed

Image enhancement

3D-DNR, BLC, HLC, AWB, AGC

 

2.2 Video encoding & streaming

Compression

H.265 Main Profile / H.264 Baseline, Main, High / MJPEG

Streams

3 concurrent - main / sub / third

Frame rate

1–30 fps on the network stream, per stream

Bit rate

64 kbps – 16 Mbps, CBR / VBR / VBR+

I-frame interval

Configurable - range to be confirmed

OSD

Channel name, date and time, bit rate; position adjustable

Image settings

Brightness, contrast, saturation, sharpness, flip, mirror

Motion detection

4 zones, sensitivity adjustable

Privacy mask

4 zones

Region of interest

To be confirmed

 

2.3 Network, protocol & storage

Network port

1 × RJ45, 10/100 Mbps auto-negotiation

Protocols

TCP/IP, HTTP, RTSP, RTP, SMTP, FTP, PPPoE, DNS, DDNS, UPnP

ONVIF

Profile S - the page quotes both 2.6 and 16.12, which must be reconciled

Web client

IE 6.0+ (ActiveX), up to 16 concurrent users

Local storage

microSD slot, up to 128 GB

Recording modes

Manual, loop, alarm-triggered, motion-triggered

Remote recording

NVR via RTSP / ONVIF

Cloud storage

Claimed in the copy, no service named - remove or specify

 

2.4 Audio, alarm & RS-485

Audio input

1 channel, 3.5 mm jack

Audio output

1 channel, 3.5 mm jack

Audio compression

G.711 - to be confirmed

Alarm input

1 channel, 2-pin terminal block

Alarm output

1 channel, 2-pin terminal block (relay rating to be confirmed)

RS-485

1 channel, flying leads 485+ / 485− - for PTZ, absent from the live interface table

Video output

1 × BNC, CVBS (SD, PAL / NTSC). Not HD-SDI and not AHD

Reset

To be confirmed

 

2.5 Power, mechanical & environmental

Power input

AC 24 V / 0.5 A per harness (AC_L / AC_N); DC 12 V / 1 A variant - to be confirmed

PoE

Claimed in the copy, absent from the power row and the harness - to be confirmed

Power consumption

2 W max

Body dimensions

50 × 39 mm (±0.2)

Body depth

27.9 mm; 32.7 mm to the lens nose

Mounting

4 corner screws on a 41.4 × 32.4 mm pattern

Weight

0.17 kg - whether the harness is included is not stated

Cable

Pigtail harness; length to be confirmed

Operating temperature

−20 °C to +60 °C

Operating humidity

< 90 % RH, non-condensing

Storage temperature

To be confirmed

Ingress protection

Not rated; indoor use - to be confirmed

 

2.6 Compliance

EMC

CE - to be confirmed

Safety

To be confirmed

RoHS

To be confirmed

Warranty

To be confirmed

Country of origin

China

 

Outline & harness

product-503-277

product-514-236

Face 50 × 39 ±0.2 mm on a 41.4 × 32.4 mm screw pattern; body depth 27.9 mm, 32.7 mm to the lens nose, 24.8 mm at the harness entry. The live page labels this block "Dimension scale: NS (mm)" while the drawing itself carries every value.

 

Output resolution & frame rate

 

Output resolution & frame rate

Twelve encoding modes are published, and all of them carry the same 25 / 30 fps ceiling. Only 1920 × 1080 is read 1:1 from the 16:9 array; the 4:3 and 5:4 modes crop vertically, so the vertical field of view narrows even though the lens does not change. A per-mode frame-rate column would settle the question of whether the ISP keeps 30 fps at every size.

Resolution

Aspect

Megapixels

Max fps (network)

Recommended bit rate (H.265)

1920 × 1080

16:9

2.07

30 / 25

4–8 Mbps

1280 × 960

4:3

1.23

30 / 25

2–4 Mbps

1280 × 720

16:9

0.92

30 / 25

1.5–3 Mbps

960 × 576

5:3

0.55

30 / 25

0.5–1 Mbps

960 × 540

16:9

0.52

30 / 25

0.5–1 Mbps

800 × 600

4:3

0.48

30 / 25

0.5–1 Mbps

960 × 480

2:1

0.46

30 / 25

0.5–1 Mbps

720 × 576

5:4

0.41

30 / 25

0.5–1 Mbps

704 × 576

11:9

0.41

30 / 25

0.5–1 Mbps

720 × 480

3:2

0.35

30 / 25

0.5–1 Mbps

640 × 480

4:3

0.31

30 / 25

0.25–0.5 Mbps

640 × 360

16:9

0.23

30 / 25

0.25–0.5 Mbps

Stream allocation

Stream

Purpose

Resolution

Frame rate

Codec

Bit rate

Main

Recording, live view

1920 × 1080

30 / 25

H.265

4–8 Mbps

Sub

Remote / mobile client

640 × 480

30 / 25

H.264

512 kbps–1 Mbps

Third

Low-bandwidth preview

640 × 360

30 / 25

H.264 / MJPEG

256–512 kbps

Worst case total

-

-

-

-

≈ 9.5 Mbps (10 % of a 100 Mbps link)

 

Interface & pin definition

 

The camera leaves the factory on a pigtail harness, not on a terminal strip. Counting the RJ45, it terminates nine functions; the live interface table lists seven and omits RS-485 and the power leads.

Interface

Connector on the harness

Notes

Network

RJ45 female

10/100 Mbps auto-negotiation; no PoE class declared

Video out

BNC female

CVBS, SD resolution only - not HD-SDI, not AHD

Audio in

3.5 mm jack

1 channel

Audio out

3.5 mm jack

1 channel

Alarm in

2-pin terminal block

Dry contact

Alarm out

2-pin terminal block

Relay; rating to be confirmed

RS-485

Flying leads 485+ / 485−

PTZ control - missing from the live table

Power

AC_L / AC_N flying leads

AC 24 V per the harness drawing

microSD

Internal slot

Up to 128 GB

 

Power options & PoE budget

Source

Supply rating

Guaranteed at device

Device draw

Headroom

AC 24 V / 0.5 A

12 VA

12 VA

2.0 W

6.0×

DC 12 V / 1 A

12 W

12 W

2.0 W

6.0×

802.3af Class 1 (if fitted)

15.4 W PSE

3.84 W

2.0 W

48 %

802.3af Class 0 (if fitted)

15.4 W PSE

12.95 W

2.0 W

85 %

Both supplies are rated six times the 2 W load, which is normal adapter headroom rather than a design margin. PoE appears nowhere in the power row or the harness drawing; if it is fitted, Class 1 covers 2 W with 48 % headroom and needs no change to the RJ45.

 

Typical applications

 

Segment

Typical deployment

Retrofit & legacy upgrades

Existing analogue sites adding an IP channel without re-cabling the monitor run

Retail & convenience

Counter overview with a local BNC monitor at the till

Banking & teller

Teller position with two-way audio and a duress alarm contact

Building & property

Lift lobbies, plant rooms, service corridors

Embedded & OEM

Inside access-control pedestals, kiosks and machine cabinets

PTZ & peripheral integration

RS-485 to a pan-tilt head or a third-party controller

The 50 × 39 × 28 mm body and the single harness entry decide most projects. A pinhole front means the lens is behind a 4 mm opening, so the mounting plate, not the camera, carries the cosmetic finish.

 

Customization & ordering

 

DV-IP3384 ships as a standard part and is adapted for volume projects. Items that touch the harness or the optics need a sample round, because both are fixed at the factory end.

 

Customization options

Area

Options

Optics

Focal length (3.7 mm standard; others on request), IR-cut vs IR-pass filter

Harness

Lead length, connector mix (drop BNC or audio), terminal-block labelling

Firmware

OSD defaults, logo or watermark, RTSP path, CGI / HTTP API

Network

Static IP or DHCP default, hostname prefix, ONVIF profile subset

Identification

Model label, serial format, MAC range, neutral or OEM packaging

Compliance

CE / FCC / RoHS declarations under the customer brand

 

Ordering information & documentation

Item

Detail

DV-IP3384

3.7 mm pinhole, AC 24 V harness, standard lead length

DV-IP3384-DC

DC 12 V harness - to be confirmed

Datasheet

PDF, revision-controlled

Outline drawing

PDF and DXF with tolerances

Harness drawing

Lead colour and function table - not published today

ONVIF conformance

Test report on request

Sample policy

One unit for evaluation; two weeks typical

Hot Tags: standard full function 2mp ip camera, China standard full function 2mp ip camera manufacturers, suppliers, factory, wh ip 018 ip cameras, best night vision security camera, 4k camera ip, jortan camera, hd kamera, internet camera for home

Send Inquiry