Product Description
Where the shutter type decides the measurement
- Defect detection on a moving production line
- Robotic pick-and-place with pose estimation
- AGV / AMR navigation and docking
- License plate and OCR capture of passing vehicles
- High-speed sorting and conveyor tracking

Product specification
2.1 Imaging & optics
|
Parameter |
Value |
|
Model No. |
YM-UM324CB305OD-B |
|
Image sensor |
1/2.9" CMOS |
|
Shutter type |
Global shutter |
|
Maximum resolution |
1600 × 1304 (2.09 MP) |
|
Pixel size |
≈3.0 µm |
|
SNR max |
37.4 dB |
|
Dynamic range |
68 dB |
|
Minimum illumination |
To be confirmed |
|
Lens mount |
M12 |
|
Focal length |
3.05 mm |
|
Field of view |
78° H × 66° V at 1600 × 1304 |
|
Focus |
Fixed |
|
IR-cut filter |
Optional |
|
VID / PID |
2C7F : 4E52 |
2.2 Interface & power
|
Parameter |
Value |
|
Digital interface |
USB 2.0 |
|
Connector |
5-pin 1.25 mm, board side |
|
Transfer rate |
480 Mbps |
|
Cable |
1500 mm (+200 / −0), 5-pin 1.25 mm to USB-A, UL1571 #26 / #28 |
|
Protocol |
UVC, driver-free |
|
Video format |
MJPG, YUY2 |
|
Power requirement |
5 V ±5% from the USB bus, 500 mA max |
|
Power consumption |
0.56 W max |
|
Supported OS |
Windows 7 / 8.1 / 10 / 11, Linux, Android 5.1+, macOS |
2.3 Mechanical & environment
|
Parameter |
Value |
|
Board dimensions |
25 × 30 mm ±5% |
|
Height (board to lens tip) |
16 mm ±0.3 |
|
Mounting holes |
4 × Ø2.2 mm on 21 × 26 mm centres |
|
Lens holder |
Ø14 mm, flange Ø15 mm |
|
Weight |
To be confirmed |
|
Operating temperature |
−25 °C to +60 °C |
|
Storage temperature |
−40 °C to +80 °C |
|
Operating / storage humidity |
0–90% RH, non-condensing |
2.4 Global shutter & exposure
|
Parameter |
Value |
|
Shutter |
Global |
|
Exposure control |
Manual exposure, adjustable by host |
2.5 Compliance & warranty
|
Parameter |
Value |
|
Compliance |
USB-IF, WHQL, CE, RoHS |
|
ESD immunity |
4 kV contact / 8 kV air (IEC 61000-4-2) |
|
Warranty |
To be confirmed |
Output resolution & frame rate
3.1 MJPG - compressed, 60 fps across all modes
|
Output resolution (W × H) |
Max frame rate, MJPG |
|
640 × 480 |
60 fps |
|
800 × 600 |
60 fps |
|
1024 × 768 |
60 fps |
|
1280 × 720 |
60 fps |
|
1280 × 960 |
60 fps |
|
1280 × 1024 |
60 fps |
|
1600 × 1304 |
60 fps |
3.2 YUY2 - uncompressed, frame rate limited by USB 2.0 bandwidth
|
Output resolution (W × H) |
Max frame rate, YUY2 |
|
640 × 480 |
30 fps |
|
800 × 600 |
15 fps |
|
1024 × 768 |
10 fps |
|
1280 × 720 |
5 fps |
|
1280 × 960 |
5 fps |
|
1280 × 1024 |
5fps |
|
1600 × 1304 |
5 fps |
3.3 Bandwidth check: what 60 fps actually costs
|
Resolution |
YUY2 frame size |
At 5 fps |
At 60 fps |
Verdict |
|
|
1600 × 1304 |
3.98 MB |
19.9 MB/s |
238.9 MB/s |
YUY2 5 fps |
|
|
1280 × 1024 |
2.50 MB |
12.5 MB/s |
150.0 MB/s |
YUY2 8 fps |
|
|
640 × 480 |
0.59 MB |
17.6 MB/s |
35.2 MB/s |
/ |
|
Interface & pin definition
4.1 Pin assignment
|
Pin |
Signal |
Wire colour |
Function |
|
1 |
5 V |
Red |
VBUS, 5 V ±5%, 500 mA max |
|
2 |
DM (D−) |
White |
USB data minus |
|
3 |
DP (D+) |
Green |
USB data plus |
|
4 |
GND |
Black |
Digital ground |
|
5 |
CON |
Braid |
Connector shell / cable shield, tied to GND |
4.2 Cable & connector
|
Item |
Specification |
|
Connector, board side |
5-pin, 1.25 mm pitch |
|
Connector, host side |
USB-A male |
|
Cable length |
1500 mm (+200 / −0) |
|
Cable type |
UL1571, #26 AWG power, #28 AWG signal |
|
Shielding |
Braided shield with drain, brought out on pin 5 |
|
Stripped length |
30 ±5 mm |
Pin 5 carries the braided shield and is tied to GND inside the connector. It is not a second power return: where a ground loop is likely, lift the shield at the camera end and bond it at the host chassis.
Dimensions

Typical applications
|
Scenario |
Why shutter behaviour matters |
What this camera gives |
|
Production-line defect detection |
Part moves during exposure |
Edges stay where the part really is, so a measured width does not grow with speed |
|
Robotic pick-and-place |
Pose is computed from a single frame |
No skew means the grasp point does not shift between frames |
|
AGV / AMR navigation |
Camera rides a moving platform |
Platform motion during readout does not bend straight walls |
|
License plate capture |
Vehicle crosses the field in tens of milliseconds |
Characters are not smeared along the direction of travel |
|
High-speed sorting |
Objects pass at speed under short exposure |
All pixels start and stop together, so a label is not sheared |
Customization & ordering
|
Option |
Standard |
Customization |
|
Focal length |
3.05 mm |
2.8 / 3.6 / 6 / 8 mm |
|
IR-cut filter |
Depends on lens option |
650 nm IR-cut, or no filter for near-IR work |
|
Cable length |
1500 mm |
1000 / 2000 / 3000 mm |
|
Connector |
5-pin 1.25 mm |
USB-C or flying leads |
|
VID / PID |
2C7F : 4E52 |
Your own VID / PID so the device enumerates under your brand |
Hot Tags: 2MP Global Shutter USB Camera for AI Imaging, China 2MP Global Shutter USB Camera for AI Imaging manufacturers, suppliers, factory, global shutter ip camera, global shutter mirrorless camera, cheapest global shutter camera, global shutter action camera, Full HD Global Shtter USB Camera for AI Imaging, global shutter camera
