Product Description
Built for machines that move
- Robotic arm pick-and-place and bin picking
- AGV / AMR navigation and obstacle avoidance
- Inspection on a running production line
- Barcode, OCR and pose measurement of moving parts
- Conveyor tracking and vision-guided docking

Product specification
2.1 Imaging & optics
|
Parameter |
Value |
|
Model No. |
DV-UM3324WD-F |
|
Image sensor |
1/4" CMOS |
|
Shutter type |
Global shutter |
|
Maximum resolution |
1072 × 1280 (1.37 MP), portrait |
|
Pixel size |
≈2.6 µm |
|
SNR max |
40 dB |
|
Dynamic range |
66 dB |
|
Minimum illumination |
0.1 Lux |
|
Lens mount |
M12 |
|
Focal length |
3.2 mm |
|
Field of view |
47° H × 54° V at 1072 × 1280 |
|
Focus |
Fixed |
2.2 Interface & power
|
Parameter |
Value |
|
Digital interface |
USB 2.0 |
|
Connector |
5-pin 1.25 mm, board side |
|
Transfer rate |
480 Mbps |
|
Cable |
2200 mm, USB-A to 5-pin 1.25 mm, UL1571 #26 / #28 |
|
Protocol |
UVC, driver-free |
|
Video format |
MJPG, YUY2 |
|
Power requirement |
5 V ±5% from the USB bus |
|
Power consumption |
0.1 W ±10% |
|
Supported OS |
Windows, Linux, Android, macOS |
2.3 Mechanical & environment
|
Parameter |
Value |
|
Board dimensions |
32 × 32 mm ±0.15 |
|
Depth (board to lens tip) |
9 mm ±0.3 |
|
Mounting holes |
4 × Ø2.2 mm on 28 × 28 mm centers |
|
Lens barrel |
Ø12 mm, clear aperture Ø8 mm |
|
Weight |
To be confirmed |
|
Operating temperature |
−25 °C to +60 °C |
|
Storage temperature |
−40 °C to +80 °C |
|
Operating / storage humidity |
0–90% RH, non-condensing |
2.4 Global shutter timing
|
Parameter |
Value |
|
Shutter |
Global |
|
Exposure time range |
Manual/Auto |
|
Frame exposure mode |
Auto |
2.5 Compliance & warranty
|
Parameter |
Value |
|
Compliance |
RoHS |
|
ESD immunity |
4 kV contact / 8 kV air (IEC 61000-4-2) |
|
Certification |
USB-IF, WHQL, CE |
Output resolution & frame rate
3.1 MJPG - compressed, 25 fps across all modes
|
Output resolution (W × H) |
Max frame rate, MJPG |
|
800 × 800 |
25 fps |
|
720 × 1080 |
25 fps |
|
720 × 1280 |
25 fps |
|
1024 × 1024 |
25 fps |
|
1024 × 1280 |
25 fps |
|
1072 × 1280 |
25 fps |
3.2 YUY2 - uncompressed, frame rate limited by USB 2.0 bandwidth
|
Output resolution (W × H) |
Max frame rate, YUY2 |
|
800 × 800 |
15 fps |
|
720 × 1080 |
10 fps |
|
720 × 1280 |
5 fps |
|
1024 × 1024 |
5 fps |
|
1024 × 1280 |
5 fps |
|
1072 × 1280 |
5 fps |
3.3 Why the two rows differ: bandwidth check
|
Resolution |
YUY2 frame size |
At 5 fps |
At 25 fps |
Verdict |
|
1072 × 1280 |
2.62 MB |
13.1 MB/s |
65.5 MB/s |
25 fps impossbile |
|
1024 × 1024 |
2.00 MB |
10.0 MB/s |
50.0 MB/s |
25 fps impossbile |
|
800 × 800 |
1.22 MB |
6.1 MB/s |
30.5 MB/s |
25 fps impossbile |
An uncompressed YUY2 frame at 1072 × 1280 occupies 2.62 MB. At 25 fps that is 65.5 MB/s, roughly twice what a USB 2.0 link carries in practice (30–35 MB/s once protocol overhead is removed), so 25 fps is only reachable in MJPG. At 5 fps the same mode needs 13.1 MB/s and fits comfortably. If the application requires uncompressed frames at full rate, use 800 × 800 at 15 fps (18.3 MB/s) or split the camera onto a dedicated host controller.
Interface & pin definition
4.1 Pin assignment
|
Pin |
Signal |
Wire colour |
Function |
|
1 |
+5 V |
Red |
VBUS, 5 V ±5% |
|
2 |
DM (D−) |
White |
USB data minus |
|
3 |
DP (D+) |
Green |
USB data plus |
|
4 |
DGND |
Black |
Power ground |
|
5 |
Shield |
Braid |
Cable shield, tied to connector shell |
4.2 Cable & connector
|
Item |
Specification |
|
Connector, board side |
5-pin, 1.25 mm pitch |
|
Connector, host side |
USB-A male |
|
Cable length |
2200 mm ±50 mm |
|
Cable type |
UL1571, #26 AWG power, #28 AWG signal |
|
Shielding |
Aluminium-mylar wrap with drain wire |
|
Orientation |
Pin 1 marked on the housing |
The cable carries power and data on a single 5-pin 1.25 mm housing. Pin 5 is the braided shield, not a second ground return: tie it to the chassis at the host end and leave the camera end floating where ground loops are a concern.
Dimensions :

Typical applications
|
Scenario |
Why shutter behaviour matters |
What this camera gives |
|
Robotic arm pick-and-place |
Part moves across the frame during exposure; a rolling shutter would bend its edges |
Global shutter removes skew, so the grasp point stays where the vision model put it |
|
AGV / AMR navigation |
Camera is mounted on a moving platform |
No distortion from platform motion during turns |
|
High-speed line inspection |
Parts pass at speed; exposure is short |
All pixels expose together, so a defect is not smeared along the direction of travel |
|
Barcode / OCR on moving parts |
Label crosses the frame mid-exposure |
Code edges stay square, which keeps decode rate stable |
|
Conveyor tracking |
Position is interpolated between frames |
Frame timing is uniform, so tracking error does not accumulate |
Customization & ordering
|
Option |
Standard |
Customization |
|
Focal length |
3.2 mm standard |
2.8 / 3.6 / 6 / 8 mm on request |
|
IR-cut filter |
Depends on lens option |
650 nm IR-cut, or no filter for near-IR work |
|
Cable length |
2200 mm |
1000 / 3000 / 5000 mm |
|
Connector |
5-pin 1.25 mm |
USB-C or flying leads |
|
Housing |
None, open board |
Acrylic or aluminium shell |
|
Branding |
D-vitec silkscreen |
Customer logo and model code |
|
Firmware |
Standard UVC |
Fixed exposure, fixed white balance, custom VID/PID |
Hot Tags: 1.3mp global shutter usb camera for robtic imaging, China 1.3mp global shutter usb camera for robtic imaging manufacturers, suppliers, factory, global shutter camera raspberry pi, raspberry pi global shutter camera, global shutter stereo camera, global shutter mirrorless camera, global shutter usb camera, raspberry pi camera global shutter
